A Water Pressure Reducing Valve Manufacturer in USA is a compact valve that reduces the water pressure from the public water main to a more consistent level for your home’s plumbing and fixtures.
Working:
It regulates the pressure of water flowing through a system by controlling the flow between the inlet and outlet sides. It works by using a dial or wheel on top of the valve to set the desired outlet pressure. This adjusts the tension of a spring that holds a diaphragm in place. When the upstream pressure is at or below the set downstream pressure, water can flow through the valve. If the pressure on the inlet side is higher than the outlet side, the diaphragm moves up and closes the valve. When the outlet side has low pressure, the valve remains open. During periods of high demand, the valve allows more water to pass through to maintain a consistent pressure.
Advantages:
Water Pressure Reducing Valve Manufacturer in USA can reduce the amount of energy needed to heat water for showers, dishwashers, and washing machines
reduce water waste and save money on water costs. For example, reducing water pressure from 100 lbs to 50 lbs can save up to one-third of the water consumed.
prevent loud noises caused by high flow velocities and water hammer.
reduce the risk of water leaks
Water Pressure Reducing Valve Manufacturer in USA below are the industries using
Chemical
Industrial
Water
Steam
Fuel oil
Compressed air
Components:
Valve body: Stabilizes the return of flow and regulates pressure
Diaphragm: Controls the valve’s position against spring pressure
Adjusting spring: Counteracts the upward force on the diaphragm from water flow to control opening size
Adjusting screw: Works with the spring to change the spring pressure
Control filter: Filters debris from the mainline to reduce damage
Pilot valve: Used in pilot-operated pressure-reducing valves to load a piston or diaphragm
Orifice: A pressure-reducing and flow-restricting device with a borehole that generates a specified pressurized flow
Description:
Body: Cast iron, Cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Stainless steel (SS304, SS316, CF8), Ductile iron.
Size: ½” to 24”.
Class: PN10 – PN100, 150-600.
Ends: Socket weld, butt weld, Flanged, threaded.
