An Inverted Bucket Steam Trap Manufacturer in USA is a mechanical device that separates steam from condensate and air. It uses an upside-down bucket that acts as a float to control the opening and closing of a valve.

Functions:
The Inverted Bucket Steam Trap Manufacturer in USA is at the bottom of the trap, and the valve is open. Condensate enters the trap and fills the body, flowing out through the outlet. Steam enters the trap and occupies space in the bucket, making it buoyant. The bucket rises and closes the valve Some of the steam under the bucket condenses, causing the bucket to lose buoyancy. The bucket sinks, pulling off the valve and allowing condensate to discharge through the outlet. The process repeats.

Inverted Bucket Steam Trap Manufacturer in USA below are the advantages:
Can operate against backpressure
Energy conserving
Free from dirt
Vents air and carbon dioxide
Resistant to pollution
Resistant to corrosion
Failure mode is usually open
Can be used with superheated steam
Tolerates water hammer
Withstands high pressures

Industries:
Oil and gas
Heating and water systems

Components:
Vent hole: Located at the top of the bucket, this allows a small amount of vapor to escape into the trap
Free-floating guided lever valve mechanism: This mechanism is frictionless and has heavily reinforced wear points.
Valve lever assembly: This is one of the two moving parts of the trap. The lever opens and closes the trap valve in response to the bucket’s motion.
Inverted bucket: The bucket is upside down and suspended in the steam line. It’s filled with air and attached to a valve stem.