Electric Actuated Control Valve Manufacturer in USA control the opening and closing of valves. With a motor drive that provides torque to operate the valve, these actuators are frequently used on multi-turn valves such as gate or globe and also on ball, plug and other quarter-turn valves.
Design:
1. Bonnet: The bonnet is the top of the valve, which houses the diaphragm and actuator spring.
2. Spring: The spring holds tension on the stem, keeping the valve in its failure position.
3. Control Valve Actuator: This actuator can be disassembled and inverted to convert the valve from fail-closed to fail open or vice versa.
4. Stuffing Box Assembly: The stuffing box assembly houses the valve packing. 5. The valve packing provides a seal that prevents leakage from the stuffing box while allowing the stem to move up and down as needed to open and close the valve.
6. Yoke and Travel Indicator: The yoke and travel indicator give a visual identification of the valve’s position at any given moment.
7. Stem and Seat: The ball and seat are what block off the flow through the valve. These are vital pieces and also the items most susceptible to wear and tear from contact with abrasive or corrosive production.
Functions:
Electric Actuated Control Valve Manufacturer in USA uses electricity as the primary means of actuation. There are several different methods of harnessing electricity to provide opening and closing. An electrical actuator moves the valve via an electric motor in one variation.
Advantages:
1. Compressed Air Not Required to Operate
2. Low Operating Costs
3. Minimal Noise
4. Flexible Motion Control
5. Slower Cycle Time Than Pneumatic Actuation
Electric Actuated Control Valve Manufacturer in USA below are the industries:
1. Oil and gas: Used in upstream, midstream, and downstream oil and gas plants
2. Water treatment: Used in water treatment and wastewater plants
3. Power generation: Used in hydroelectric power generation
4. Food and beverage: Used in food and beverage manufacturing
5. Pulp and paper: Used in pulp and paper plants
6. Pharmaceuticals: Used in the pharmaceutical industry
7. HVAC: Used in HVAC systems
8. Construction: Used in construction
Description:
• Body Materials: Ductile Iron, Cast iron (WCB, WCC, WC6) LCC, LCB, Stainless Steel (SS316, SS304), Super Duplex (F51, F53, F55)
• Class: 150 to 2500, PN10 to PN450
• Operations: Electric
• Size: DN15 to DN600
• Ends: Flanged, butt weld, socket weld, threaded
